Stinger HEIGH10
®
Installation & Integration Kit
for 2011-2018 Jeep
®
Wrangler JK
SRK-JK11H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
AAMP Global is not affiliated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms
OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identification purposes only. It is not
implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.
Pacific Accessory Corporation
Page 14
Rev: V1
Date:102722
®
Section 4: Radio Unit Installation (cont.)
Part Two: Mounting the Radio Assembly (cont.)
Reinstall any remaining 7mm
screws to secure the radio
assembly.
Reinstall the factory 7mm screw
in the upper storage tray. If using
the clip-on nut, use the #10-24
X ½” Phillips machine screw to
secure.
Lower the steering wheel and
align and reinstall the instrument
cluster / radio panel. Ensure that
all retaining clips are fully seated
and the two display cables are
accessible.
Step 7
Step 8
Step 9
Part Three: Attaching the Display Panel
Step 3
Step 2
Step 1
Apply a piece of removable tape
across the bottom of the radio
opening to protect the dash panel
during installation.
Apply a piece of cloth tape across
the top and bottom edges of the
radio opening. Approximately 1/4”
of tape along the face of the dash
panel and the remainder folded
inward.
Connect the two display cables to
the back of the display.
1/4”
1/4”
