Stinger HEIGH10
®
Installation & Integration Kit
for 2011-2018 Jeep
®
Wrangler JK
SRK-JK11H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
AAMP Global is not affiliated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms
OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identification purposes only. It is not
implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.
Pacific Accessory Corporation
Page 15
Rev: V1
Date:102722
®
Part Three: Attaching the Display Panel
Step 4
Step 5
To attach the display assembly,
align the location ribs on the sides
of the mounting panel to the side
brackets to center the panel side
to side.
Center the display assembly in the
radio opening and push inward
until it snaps in place.
Note: Once the locking clips
engage, the panel will stay in place
Part Three: Attaching the Display Panel (cont.)
Section 4: Radio Unit Installation (cont.)
Installer Note!
If you are having trouble locking the display
in place,
confirm the four side mounting screws
are flush and not protruding beyond the thickness
of the plastic. (FIG A)
FIG A
