STINAR Flush & Fill Cart SFFC-70/2, Manual

Page: 33 / 52

SECTION 2 | SERVICING THE FLUSH AND FILL CART
Flush & Fill Cart SFFC-70/2 | 33
2.2 |
TROUBLESHOOTING
This section includes troubleshooting information for the Stinar installed
systems of the SFFC-70/2. For troubleshooting motor problems, refer to
the motor manual
The troubleshooting information that follows provides trouble analysis
for possible malfunctions. Included are possible problems, probable
causes and suggested remedies for problems that may occur. Refer to the
coolant system schematic (Figure 2.2) for assistance with troubleshooting
this system.
The troubleshooting data provided for the electrical system presupposes
that common circuitry checks will be made and that no open leads or
loose connections exist.
2.2.1 | Troubleshooting Table
TROUBLE PROBABLE CAUSE REMEDY
Cart Chassis
Cart will not turn
left or right.
Tow bar locked in raised
position. Release foot latch and
lower tow bar.
Brakes set too tight.
Adjust brake tension.
See ADJUSTMENT
section following.
Damaged tire(s). Repair tire(s).
Brakes will not lock.
Brakes set too loose. Adjust brake tension.
Unattached brake rod,
bolt or nut. Reattach rod, bolt or
nut.
Broken rod, bolt or nut. Replace rod, bolt or nut.
Broken or missing
brake bar.
Repair or replace brake
bar.
Broken or missing tow
bar foot latch.
Replace foot latch.
Cart Chassis (continued)
Wheel will not turn.
Seized or broken wheel
bearing.
Clean and repack
bearing or replace
bearing.
Coolant System (See Figure 2.2 for Schematic)