Still SXH-20 Original Instructions Manual Download Page 90

Page: 90 / 126

Handling the truck in specific situations

Slinging the truck

DANGER

Danger of truck falling
Only use slings (2) or a hoist of sufficient quality.

Check the weight of the machine (including battery)

in order to choose a suitable device. Refer to the

technical data.

Observe the following instructions:

–

Immobilise the truck.

–

Lower the load arms.

–

Switch off the ignition and remove the key.

–

Press the emergency off switch.

–

Remove any items that could fall.

–

Protect all parts that come into contact with

the lifting device (1).

–

Hook the lifting device (1) onto the sling

hook only.

–

Lift the truck slowly and carefully.

NOTE

Never sling the truck by the control unit or

other points not designed for this.

DANGER

Risk of falling
Personnel must not stand under or near the truck

when slinging the truck.



Use

Handling the truck in specific situations

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands