Still SXH-20, Original Instructions Manual

Page: 59 / 126

Braking by reversing the drive direction
–
Move the drive switch in the direction (1) or
(2).
–
While travelling, move the switch in the op-
posite direction.
The truck is braked electrically.
–
Release the drive switch at the required
speed.
The truck comes to a standstill.
Braking by releasing the drive switch
–
While travelling, completely release the
drive switch.
The truck is braked electrically.
The parking brake is applied automatically
when the truck speed is close to zero.
The truck comes to a standstill.
Electromagnetic braking
The electromagnetic parking brake is activa-
ted automatically if one of the following condi-
tions is met:
●
The forklift operator presses the emergency
off switch
●
The power supply is cut off
Horn
The horn is positioned on the rear side of the
control module.
It is used:
●
On routes where there is poor visibility
●
At junctions
●
In the event of immediate danger
–
Press the button (1) on the control module.
The horn sounds.


Use
4
Driving
49 11548011551 EN - 02/2021 - 07