Still SXH-20 Original Instructions Manual Download Page 25

Page: 25 / 126

Disposal of consumables

ENVIRONMENT NOTE

Materials that have to be disposed of following

maintenance, repair and cleaning must be

systematically collected and disposed of in ac-

cordance with regulations. Observe the na-

tional regulations for your country. Work may

only be carried out in areas designated for this

purpose. Take care to minimise, as far as pos-

sible, any impact on the environment.

●

Any spillage of fluids such as hydraulic oil,

brake fluid or gear lubricant oil must be im-

mediately soaked up with an oil-binding

agent.

●

The regulations for disposal of used oil are

applicable.

●

Any spillage of battery acid must be neutral-

ised immediately.

Safety

Safety regulations for handling consumables

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands