Still SXH-20 Original Instructions Manual Download Page 58

Page: 58 / 126

Forward travel

–

Using your thumb, push the drive switch to

the left (1) to travel forwards (opposite fork

direction).

–

When the drive switch is released, the truck

brakes electrically.

Reverse travel

–

Using your thumb, push the drive switch to

the right (2) to travel backwards (fork direc-

tion).

–

When the drive switch is released, the truck

brakes electrically.

WARNING

Restricted visibility
During reverse travel, visibility may be restricted. Be

very careful. Make sure that the path behind is clear

before travelling backwards.

Reversing the drive direction

–

Push the drive switch in direction (1) or (2).

–

Release the drive switch.

–

Operate it progressively in the opposite di-

rection until the required speed is reached.

Braking

WARNING

The quality of the floor surface affects the braking

distance of the truck.
This should be taken into consideration when driving.



Use

Driving

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands