Still iGo neo CX-20, Supplement Instructions

Page: 74 / 112

4
Operating the iGo neo
Operating the truck in ASSISTANCE mode
Behaviour of the truck in response to obstacles in the roadway
DRIVE
DRIVE
STOP
A B
DANGER
Danger of collisions with obstacles that the safety
laser scanner cannot detect.
Observe the notes about the limits to detecting
obstacles given in the chapter entitled "Function of
the safety laser scanner".
– Check the roadway above all for obstacles that
the safety laser scanner cannot detect and
remove these obstacles.
– If there is a risk of danger, immediately bring
the truck to a standstill by pressing one of the
emergency off switches.
If the truck detects an obstacle on the side of
the roadway to which the truck is aligned, the
truck automatically drives around the obstacle
and continues on its path (A).
If an obstacle is too large to drive around,
the truck will stop in front of the obstacle (B).
ASSISTANCE
mode is resumed without
intervention from the operator as soon as
the obstacle is removed.
66 50108046085 EN - 08/2017