manualshive.com logo in svg

Still FXV 14, Original Instructions Manual, Page: 47 / 174

Share
Download
Still FXV 14 Original Instructions Manual Download Page 47

 NOTE

Also ensure that the stabiliser wheels operate

correctly. This influences braking effective-

ness.

Braking with the dual-pedal option

Braking using the brake pedal

–

Press the accelerator pedal (2) or (3) to

move the truck forwards.

–

Release the accelerator pedal.

–

Press the brake pedal (1).

The truck brakes progressively until the truck

comes to a complete stop.
Braking by releasing the accelerator

–

Press the accelerator pedal (2) or (3) to

move the truck forwards.

–

Release the accelerator pedal.

The truck brakes progressively until the truck

comes to a complete stop.
Braking by reversing the drive direction

–

Press the accelerator pedal (2) or (3) to

move the truck forwards.

–

Press the other accelerator pedal.

–

Keep the pedal depressed.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.

 NOTE

Also ensure that the stabiliser wheels operate

correctly. This influences braking effective-

ness.

Use

4

Checks and actions prior to commissioning

 37

11748011651 EN - 02/2021  -  06

Summary of Contents for FXV 14















































































































































































Reviews:

No comments