Still FXV 14, Original Instructions Manual

Page: 113 / 174

Starting the truck
NOTE
When starting the truck, the forks must be in
the lowered position.
If the forks are in the raised position when
starting the truck, the Dynamic Load Con-
trol icon (3) is highlighted.
A yellow triangle symbol (1) appears on the
display.
The display indicates that the forks (2) must
be lowered. The arrow points downwards.
The mandatory lowering of forks function ap-
plies only to the DLC 3.
During work
When using the truck, the forks must be low-
ered regularly.
If the forks remain in the raised position for
more than four hours:
–
A beep sounds
–
The Dynamic Load Control icon (3) appears
on the display
–
A yellow triangle symbol (1) appears on the
display.
–
On the display, the arrow (2) points down-
wards only.
–
The forks must be lowered immediately
If the operator does not lower the forks imme-
diately, the truck will only move at 4 km/h and
the lifting speed will be reduced.
CAUTION
The display screen no longer works.
Do not continue to operate the truck. Contact the Af-
ter-Sales Service Centre to change the display.

Use
4
Driving assistance system: Dynamic Load Control
103 11748011651 EN - 02/2021 - 06