Still FXV 14, Original Instructions Manual

Page: 108 / 174

Example of reading a display with the Dy-
namic Load Control (DLC) option version 1:
load weight close to maximum values
The weight of the load on the forks is 2000 kg
(2). A tolerance of ± 50 kg applies. The dis-
played weight takes this into account.
The maximum authorised load (1) on the forks
is 2000 kg.
The measured weight is the maximum weight.
A warning beep sounds once and a yellow tri-
angle symbol (3) is shown on the display. The
measured weight (2) flashes.
An arrow indicates whether it is possible to
continue raising or lowering the forks. The
beep indicates that the weight is approaching
the maximum weight.
Example of reading a display with the Dy-
namic Load Control (DLC) option version 1:
weight of the load significantly exceeded
The weight of the load on the forks is 1600 kg
(3). A tolerance of ± 50 kg applies. The dis-
played weight takes this into account.
The maximum authorised load (1) on the forks
is 1400 kg.
The measured weight exceeds the maximum
weight. Warning beeps sound and a red trian-
gle symbol (2) is shown on the display. The
measured weight (3) flashes.
The arrow points downwards only.
The operator must lower the forks immediate-
ly. The symbol disappears and the beeps
stop.
WARNING
Risk of loss of stability
While driving the truck, the operator must not listen
to an MP3 player or any other device that could im-
pair awareness of his/her working environment.
He/she also must be very vigilant in case of loud am-
bient noise. He/she might not hear the warning
beeps.


Use
4
Driving assistance system: Dynamic Load Control
98 11748011651 EN - 02/2021 - 06