Still FXV 14, Original Instructions Manual

Page: 111 / 174

Example of reading a display with the Dy-
namic Load Control (DLC) option version 3:
weight of the load slightly exceeded
The weight of the load on the forks is 1450 kg
(6). A tolerance of ± 50 kg applies. The dis-
played weight takes this into account.
The maximum authorised load (3) on the forks
is 1400 kg.
The maximum authorised height (1) is 3.3 m.
The measured lift height (4) is 2.9 m. The
weight of load on the forks exceeds the au-
thorised value for this height. The lift height is
lower than the maximum authorised height. A
warning beep sounds once and a yellow trian-
gle symbol (2) is shown on the display. The
measured weight flashes.
The arrow (5) points downwards only.
The operator must lower the forks and the
symbol disappears. However, lifting can con-
tinue in order to free a load.
There is a similar display when the measured
lift is greater than the authorised lift.
Example of reading a display with the Dy-
namic Load Control (DLC) option version 3:
weight of the load significantly exceeded
The weight of the load on the forks is 1600 kg
(6). A tolerance of ± 50 kg applies. The dis-
played weight takes this into account.
The maximum authorised load (3) on the forks
is 1400 kg.
The maximum authorised height for the maxi-
mum weight (1) is 3.3 m.
The measured lift height (4) is 2.9 m. The load
on the forks is too heavy. The lift height is low-
er than the maximum authorised height. Warn-
ing beeps sound and a red triangle symbol (2)
is shown on the display. The measured weight
flashes.
The arrow (5) points downwards only. Lifting is
then blocked.
The operator must lower the forks immediate-
ly. The symbol disappears and the beeps
stop.


Use
4
Driving assistance system: Dynamic Load Control
101 11748011651 EN - 02/2021 - 06