Still EXV 10 Original Instructions Manual Download

Page: 86 / 154

Reversing the direction of travel

Reverse direction without a load on the

forks

●

To reverse direction when travelling without

a load on the forks, turn the drive control

throttle in the opposite direction to the direc-

tion of travel. The truck will stop with ener-

getic but gradual braking and will start to

move again in the opposite direction.

Reverse direction with a load on the

forks

●

To reverse direction with a load on the

forks, put the drive control throttle in the

neutral position and wait for the truck to

stop.

●

Then turn the drive control throttle in the op-

posite direction of travel to the previous

one.

CAUTION

The operator must regulate the travel control by

adapting truck braking to the type of load being car-

ried in order to avoid losing the load.

Use

Driving

45728043478 EN - 11/2021 - 09

Summary of Contents for EXV 10



























































































































































Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands

Still EXV 10, Original Instructions Manual

Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands