Still EXV 10 Original Instructions Manual Download

Page: 81 / 154

Check the information on the

combined indicator

The instrument can display several of the

truck's functions:

Discharge indicator

The discharge indicator (3) operates after the

battery connector has been connected. Moni-

toring the discharge process protects the bat-

tery against significant discharge.
When the battery is fully charged, the 10 sta-

tus bars are lighted. As battery capacity falls,

the display moves to the left.
If the battery is 80% discharged, two status

bars are lit. The lifting function is switched off.

The battery must be recharged.

Hourmeter

The hour meter (4) indicates the number of

operating hours of the machine.
The display is activated as soon as the ma-

chine is switched on. The green indicator light

(2) comes on.

0.0

0252_003-049-V2



Use

Driving

45728043478 EN - 11/2021 - 09

Summary of Contents for EXV 10



























































































































































Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands

Still EXV 10, Original Instructions Manual

Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands