Still EXV 10 Original Instructions Manual Download

Page: 67 / 154

Transporting and lifting the truck

Transporting the truck

The forklift is normally transported by road and

rail. If the forklift's dimensions exceed the

max. clearance size allowed, it is transported

disassembled. The sales network is in charge

of the disassembly and reassembly opera-

tions. The forklift must be secured to the trans-

port means during transport using appropriate

restraint systems. Block the wheels with

wedges to prevent even the slightest move-

ment.

Transport

–

Disconnect the battery connector.

Chocking the truck

–

Secure the truck against rolling and sliding

with chocks (1).

Lashing down the truck

–

Attach the lashing ropes (2) to the mast.

OM0747



0252_003-010



Climatic Conditions for Transport and Storage

The forklift must be protected from atmospher-

ic agents during transport and storage.

Use

Transporting and lifting the truck

45728043478 EN - 11/2021 - 09

Summary of Contents for EXV 10



























































































































































Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands

Still EXV 10, Original Instructions Manual

Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands