Still EXV 10, Original Instructions Manual

Page: 61 / 154

PROGRAMMING MODE — to be carried out with the truck switched off (2)
Restoring the ini-
tial administrator
code
To reactivate the default
administrator code
(00000000), please con-
tact your agent or near-
est dealer.
Activating the au-
tomatic switch-off
* * 2 * 1 #
● red flashing ● green
flashing (5) (5 s before
switch-off)
The power supply
switches off automatical-
ly after 10 min. (600 s by
default) if the truck is not
being used.
Setting the delay
of the automatic
switch-off
* * 3 * 6 0 #
○ red off ● green flash-
ing (2) (value accepted)
Example: automatically
switches off after 1 min.
(60 s) if not used.
Minimum setting = 10 s /
maximum = 3000 s
Deactivating the
automatic switch-
off
* * 2 * 0 #
○ red off ● green flash-
ing (2) (command ac-
cepted)
Stand-by
NOTE
The stand-by function is only available with
the Digicode option.
To prolong battery life, the truck can be put in-
to energy-saving mode when it is not in use.
After a certain period of downtime, the truck
switches off.
This time period can be configured between 0
and 10 minutes. This function is disabled by
default.
Timeout can be adjusted. Contact the Techni-
cal Service Department authorised by the
manufacturer.
Overview
3
Options and variants
51 45728043478 EN - 11/2021 - 09