Still EXV 10 Page 73 Original Instructions Manual Download

Page: 73 / 154

–

Release the anti-crush safety device.

The truck stops.

Checking the brake

CAUTION

Perform this check on a flat surface.

–

While driving, tilt the tiller in areas (C) and

(A) to test brake response.

In these two areas, the truck is stopped and

the drive unit is no longer powered. Releasing

the tiller in driving area (B) sends the tiller into

the area (C) and cuts traction.

Checking the emergency stop

–

Drive slowly forwards.

–

Press emergency stop button (1).

The truck stops.

–

Pull the emergency stop button (1).

The truck is functional.

NOTE

Ensure the stabilising wheels are correctly ad-

justed. This influences braking effectiveness.

0252_003-029

5˚



0252_003-047



Use

Checks and operations prior to use

45728043478 EN - 11/2021 - 09

Summary of Contents for EXV 10



























































































































































Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands

Still EXV 10, Original Instructions Manual

Search results

Summary of Contents for EXV 10

Reviews:

Related manuals for EXV 10

Brands by name

Popular brands