Still ECU-SF-20, Original Instructions Manual, Page: 62 / 92

5
Maintenance
Maintenance as required
Maintenance as required
Cleaning the Forklift
Cleaning depends on the type of use and the
workplace. Should the truck come into contact
with highly aggressive elements such as salt
water, fertilizers, chemical products, cement,
etc., it should be cleaned as carefully as
possible after every work cycle. It is preferable
to use cold compressed air and detergents.
Use water-dampened rags to clean the parts
of the body.
CAUTION
Do not clean the truck with direct jets of water; DO
NOT use solvents and petrols that could damage
parts of the truck.
1
5
5
4
3
2
OM1391
Changing the battery
• Turn off the truck and perform the prelimi-
nary maintenance operations.
• Raise the battery compartment cover (1).
• Disconnect the plug (3) from the outlet (2).
• Remove the battery holddowns (4).
• Attach hooks to the battery at the two points
(5) using a sling which is suitably sized for
the weight of the battery.
• Lift the battery using a hoist suitably sized
for the weight of the battery.
• Change the battery and refit it by following
the above steps in the reverse order.
CAUTION
To decide which type of battery to use, check the
battery characteristics provided in the "TECHNI-
CAL DATA" chapter.
56 45378043402 [EN]