Still ECU-SF-20, Original Instructions Manual, Page: 11 / 92

Introduction
1
Technical service and spare parts
Technical service and spare parts
For scheduled maintenance and any repairs to
the forklift, contact only the authorised service
network.
The authorised service network has personnel
trained by the manufacturer, original spare
parts and the tools necessary to carry out
maintenance and repairs.
Servicing by the authorised service network
and the use of original spare parts maintain
the technical characteristics of the forklift over
time.
Only original spare parts provided by the man-
ufacturer may be used for forklift maintenance
and repairs. The use of non-original spare
parts invalidates the warranty and renders the
user responsible for any accidents due to the
inappropriateness of the non-original parts.
Normative References
This forklift complies with:
• The most recent version of Machine Direc-
tive 2006/42/EC in effect
• Electromagnetic Compatibility Directive
2004/108/EC and subsequent amend-
ments, relative to forklifts for handling in
accordance with the EN 12895 standard
The noise tests regarding the sound pressure
level at the driver’s seat were carried out
in accordance with the EN 12053 standard
and declared according to the EN ISO 4871
standard
The vibration tests were carried out in accor-
dance with standard EN 13059 and declared
in accordance with standard EN 12096.
The limit values for the electromagnetic
emissions and immunity relative to the forklift
are those set out in the EN 12895 standard.
Type of use
"Normal use conditions" of the forklift under-
stood as:
• lifting and/or transport of loads using forks
with weight and centre of gravity within the
values provided (see Chapter 6 - Technical
Data).
• transport and/or lifting on smooth, flat and
compact surfaces;
• transport and/or lifting of stable loads
uniformly distributed on the forks;
• transport and/or lifting with the load centre
of gravity approximately on the forklift’s
median longitudinal plane.
DANGER
The forklift must not be used for other purposes.
Any other use renders the user solely responsible
for injury/damage to persons and/or objects and
voids the warranty.
The following are examples of improper use of
the forklift:
• transport on irregular floors (uneven,
sloping or non-compact surfaces);
• loads that exceed the weight and/or centre
of weight limits;
• transporting non-stable loads
• transporting loads not equally distributed on
the forks;
• transporting swinging loads;
• transporting loads whose centre of gravity
is considerably displaced with respect to
the forklift’s longitudinal median plane;
• transporting loads of dimensions such as to
block the view of the operator when driving;
• transporting loads piled so high that they
could fall on the operator;
• travelling with a load over 500 mm off the
ground;
45378043402 [EN] 5