Still ECU-SF-20, Original Instructions Manual, Page: 35 / 92

Knowledge of the Truck
3
Operator step plate
Operator step plate
The operator step plate (1) has three positions;
Position "A" = step plate raised
This position is used when the truck is oper-
ated with the driver on the ground and the side
panels are open; the truck can move in this
position, while its drive speed is electronically
limited to approximately 6 km/h.
NOTE
Traction is blocked when the side panels are
closed.
Position "B" = step plate on stand-by
Traction is constantly blocked in this position.
Position "C" = step plate in working position
with the operator on board
This position is automatic when the operator
steps onto the step plate (1). Truck traction
is constantly enabled in this position and the
speed of the truck varies in relation to the
position of the side panels:
• With the side panels closed, the truck can
reach its maximum speed.
• With the side panels open, the truck’s speed
is electronically limited to ~ 6 km/h.
Moving the step plate
1983
1
2
3
A
B
C
To raise or lower the step plate, manually
move the plate in the direction of the (2) arrow
to raise it and in the direction of the (3) arrow
to lower it.
45378043402 [EN] 29