Still ECU-SF-20, Original Instructions Manual, Page: 29 / 92

Knowledge of the Truck
3
Instrumentation and Controls
Tiller controls
OM0390
1
2
2
4
3
5
B
A
1
2
2
3
4
A
B
–
NOTE
All drive and lifting controls can be activated
with the tiller in working position.
Anti-crush button (1)
• By pressing the button (1) while the truck
is travelling towards the operator, the truck
will stop.
Drive control throttle (2)
• When the throttle (2) is turned towards "A",
the truck starts moving in the direction of the
fork arms.
• When the throttle (2) is turned towards "B",
the truck starts moving in the direction of the
operator.
• The truck speed increases according to the
angular position of the throttle.
• Releasing the throttle causes braking and
subsequently the stopping of the truck.
Fork lowering button (3)
• Press button (3) to lower the forks; when the
button is released, the forks will stop in the
position attained.
Fork lifting button (4)
• Press button (4) to lift the forks; when the
button is released, the forks will stop in the
position attained.
Horn button (5)
• Press the button (5) to operate the horn.
This device allows the driver to signal his
presence when necessary.
CAUTION
Press the button (1) with the truck stationary and
the tiller in working position to move the truck in
direction "A" (fork side).
45378043402 [EN] 23