Still ECU-30 Original Instructions Manual Download Page 72

Page: 72 / 92

General Information

To keep your forklift in good condition, carry

out the servicing indicated regularly, within the

times indicated and using the consumption

materials provided for that purpose, as speci-

fied on the following pages. Please make sure

that you keep a record of work done; this is

the only way for the guarantee to remain valid.
Maintenance is divided into:

●

Regular Service (scheduled by the user)

●

Planned maintenance (to be performed by

the service network authorised by the man-

ufacturer)

DANGER

Planned maintenance and repairs must be per-

formed by the service network authorised by the

manufacturer in order to keep the machine in per-

fect condition and compliant with technical specifi-

cations.

NOTE

Contact the authorised service network for a

maintenance contract appropriate to your fork-

lift.

CAUTION

Maintenance intervals are defined for standard use.

In the following cases, it is necessary to reduce the

interval between the various scheduled maintenance

operations: in the event of use in dusty or salty envi-

ronments, extremely high or low ambient tempera-

tures, high levels of air humidity, particularly intense

and heavy-duty uses, and specific national regula-

tions for trucks or individual components.

Maintenance

General Information

45628043489 EN - 11/2021 - 04

Summary of Contents for ECU-30





























































































Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands

Still ECU-30, Original Instructions Manual

Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands