Still ECU-30 Original Instructions Manual Download Page 69

Page: 69 / 92

DANGER

If the truck is fitted with an on-board battery charg-

er, it is strictly prohibited to connect the battery to

an external battery charger.

CAUTION

Make sure that the mains supply voltage complies

with the battery charger's operating voltage.

DANGER

The electrical system must comply with the current

national regulations.

Battery type

Trucks can be fitted with different types of bat-

tery. Observe the instructions on your battery

type plate, as well as the specifications de-

fined in the chapter "Technical data".

WARNING

The weight and size of the battery influence the sta-

bility of the truck.
The new battery must comply with the weight shown

on the truck identification plate. Install the battery

precisely and in accordance with technical regula-

tions.

CAUTION

Be careful not to damage any wiring when replacing

the battery.

Preparation

Maintenance personnel

The battery may only be changed by specially

trained personnel, in accordance with the

manufacturer's instructions for the battery, the

battery charger and the truck. The mainte-

nance instructions for the battery must be ob-

served.

Use and operation

Charging the battery

45628043489 EN - 11/2021 - 04

Summary of Contents for ECU-30





























































































Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands

Still ECU-30, Original Instructions Manual

Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands