Still ECU-30 Original Instructions Manual Download Page 48

Page: 48 / 92

channels, railway crossings and other similar

obstacles must be levelled and, if necessary,

fitted with ramps so that the truck can cross

without jolting.
There must be sufficient distance between the

highest part of the truck or the load and the

surrounding fixed installations. The height de-

pends on the lift height and the dimensions of

the load. Refer to the technical characteristics.

Regulations regarding the traffic routes

and the manoeuvring areas

Only traffic routes authorised by the operator

or his agent may be used. Traffic routes must

be free of obstacles. Loads may only be un-

loaded and stored in places designed for this

purpose. The operator or his agent must en-

sure that no unauthorised person approaches

the working area.

Hazards

Hazards on the traffic routes must be signalled

by standard road signs or possibly by addition-

al warning notices.

Use and operation

Authorised and safe use

45628043489 EN - 11/2021 - 04

Summary of Contents for ECU-30





























































































Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands

Still ECU-30, Original Instructions Manual

Search results

Summary of Contents for ECU-30

Reviews:

Related manuals for ECU-30

Brands by name

Popular brands