Ironwood CUT 18 | User Manual
11
4.2 Dust Exhaust Outlet
PARTS REQUIRED:
• Dust port connection
TOOLS REQUIRED:
• Allen wrench
The CUT 18 is equipped with a dust exhaust outlet, located on the
left side of the machine.
Exhaust port
Attach the dust collection manifold to the machine frame with the
three Allen bolts provided.
The dust exhaust outlet diameter is 4". Use a proper diameter of
flexible hose to connect the exhaust outlet to an appropriately sized
dust collector. Refer to section 1.5 for dust collection requirements.
4.3 Safety Guard Assembly
WaRninG
Always use the safety guard assembly when using the CUT 18.
PARTS REQUIRED:
• Safety guard assembly
TOOLS REQUIRED:
• Adjustable wrench
Adjustable fingers
Safety guard
1. Attach the safety guard assembly body at the pilot hole
locations using the hex nuts provided. There are four mounting
points on the guard assembly body:
• front of machine
• inside-back on the table side of the guard assembly
• outfeed side of the machine
2. Adjust the acrylic fingers on the safety guard to the height of
your workpiece, leaving
1
⁄
4
" –
3
⁄
8
" clearance.
