Ironwood CUT 18 | User Manual
9
3.6 Level
TOOLS REQUIRED:
• Bubble Level
• Adjustable wrench
Use a bubble level along the length and width of the tabletop surface
to check for level. Use an adjustable wrench to adjust leveling bolts
to level the machine.
Be sure to level
the machine.
3.7 Pre-Operation Cleaning
WaRninG
Use proper cleaning agents and methods described below. Do not
use gasoline or other petroleum-based solvents. There is a risk of
explosion and burning if these products are used. Serious personal
injury may occur.
Machine Surfaces
After the machine is unpacked, remove the rust preventative oil that
coats the machine. Use a soft cloth and nonflammable degreasing
agent, such as Simple Green or other orange/citrus-based cleaner.
Do not use abrasive pads.
Saw Blade Flanges
If blade is not pre-mounted, remove saw blade flanges and clean
well to remove all rust-preventative oils. When cleaning, make sure
no dust or debris is left on the saw blade flanges.
