Stihl SGA 85, Instruction Manual

Page: 39 / 304

Fault LEDs on bat‐
tery and beeps
on the sprayer
Cause Remedy
find the battery
with . mobile device is deac‐
tivated.
Distance between bat‐
tery and mobile
device is too long.
► Reduce distance, 20.3.
► If the battery still cannot be found with
the STIHL connected app: Contact a
STIHL authorized dealer for assistance.
19.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.
20 Specifications
20.1 STIHL SGA 85 Sprayer
–
Approved battery: STIHL AP 100 and AP 200
–
Maximum working pressure: 6 bar
–
Maximum filling quantity: 17 l
–
Weight without battery and empty container:
6.2 kg
–
Weight with battery and filled container: max.
25 kg
–
Residual volume of spray medium (measured
with spot jet at 1.5 bar): 250 ml
–
Mesh size of the filter in the spray gun:
0.28 mm x 0.28 mm
–
Mesh size of the filter in the container:
0.25 mm x 6.3 mm
–
Mesh size of the sieve: 1.4 mm x 1.4 mm
Consult www.stihl.com/battery-life for the respec‐
tive running time.
20.2 Flow rate
Pressure 2 bar
–
Full cone jet: 0.45 l/min
–
Spot jet: 1.18 l/min
Pressure 3 bar
–
Full cone jet: 0.55 l/min
–
Spot jet: 1.43 l/min
Pressure 4 bar
–
Full cone jet: 0.64 l/min
–
Spot jet: 1.65 l/min
Pressure 6 bar
–
Full cone jet: 0.77 l/min
20.3 STIHL AP battery
–
Battery technology: lithium-ion
–
Voltage: 36 V
–
Capacity in Ah: see rating label
–
Energy content in Wh: see rating label
–
Weight in kg: see rating label
–
Permissible temperature range for operation
and storage: + 10 °C to + 50 °C
– Bluetooth
®
radio interface (only for batteries
with ):
– Data connection: Bluetooth
®
5.1. The
mobile appliance must be compatible with
Bluetooth
®
Low Energy 5.0 and support
Generic Access Profile (GAP).
–
Frequency band: ISM band 2.4 GHz
–
Maximum RF power transmitted: 1 mW
–
Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
and through metal barriers (such as walls,
shelves or cases).
–
Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
20.4 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power level is 2 dB(A).
–
Sound pressure level L
p
measured according
to ISO 11203: 66 dB(A)
–
Sound power level L
w
measured according to
ISO 3744: 77 dB(A)
–
Vibration measurement a
hv, eq
measured
according to ISO 20643, spray lance: 0.9 m/s².
The indicated values have been measured in
accordance with a standardised test method and
can be used for the purpose of comparing electri‐
cal appliances. The actual values that occur may
deviate from the indicated values, depending on
the type of application. The indicated values can
be used for an initial assessment of the load. The
actual load must be assessed. The times when
the electric power tool is switched off and the
times when it is switched on but running under
20 Specifications English
0458-600-9821-B 39