MS 441 C-M
English
23
lever to Start
}
and simultaneously
release the throttle trigger and throttle
trigger lockout.
Simultaneously pressing the throttle
trigger lockout and blipping the throttle
trigger causes the Master Control lever
to jump from the start
}
position to the
operating position
F
.
Holding the chain saw
There are two ways to hold the chain
saw during starting.
On the ground
N
Place the chain saw securely on the
ground – assume a steady stance –
the saw chain must not touch any
objects and also must not touch the
ground
N
With the left hand on handlebar,
press the chain saw firmly against
the ground – thumb wrapped
around the handlebar
N
Place your right foot through the
rear handle
Between the knees or thighs
N
clamp the rear handle between the
knees or thighs
N
grip the handlebar firmly with the left
hand – thumb wrapped around the
handlebar
219BA036 KN
219BA037 KN
