![background image](http://html1.mh-extra.com/html/stihl/ms-290/ms-290_instruction-manual_1378905031.webp)
MS 290, MS 310, MS 390
English
29
Starting the engine
only versions with decompression valve
N
press on the grommet in the
direction shown by the arrow – the
decompression valve is opened
It is closed automatically when the
engine starts for the first time.
N
for this reason, press the
decompression valve again before
each additional starting procedure
For all versions
N
Observe safety precautions
N
Push the hand guard (1) forwards:
the saw chain is blocked
N
Simultaneously press the throttle
trigger lockout (2) and throttle
trigger (3) – set master control
lever (4)
Position cold start
l
–
If engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position warm start
n
–
If engine is warm (once the engine
has been running for approx. one
minute)
N
Place the chain saw securely on the
ground and assume a steady
stance – the saw chain must not
touch any objects or the ground
WARNING
There must not be anyone within the
swivel range of the saw.
N
With the left hand on handlebar,
press the chain saw firmly against
the ground – thumb wrapped
around the handlebar
N
Place your right foot into the rear
handle
Starting / Stopping the
Engine
209BA014 KN
2
1
0
209BA022 KN
3
4
STOP
143BA018 KN