![background image](http://html1.mh-extra.com/html/stihl/ms-290/ms-290_instruction-manual_1378905026.webp)
MS 290, MS 310, MS 390
English
24
Closing
Bracket is in an upright position:
N
Position filler cap – markings on filler
cap and fuel tank must align
N
Push the filler cap down as far as it
will go
N
Hold the filler cap down and turn it
clockwise until it engages
Then the markings on filler cap and fuel
tank will align
N
Close bracket lock
Filler cap is locked
If the filler cap will not lock onto the fuel
tank
The base of the filler cap is twisted in
relation to the upper part.
N
Remove the filler cap from the fuel
tank and look at it from above
N
Fit filler cap and turn it
counterclockwise until it engages in
the seat of the filling port
N
Continue to turn the filler cap
counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap
into the correct position
N
Turn the filler cap clockwise and
close it – see section "Closing"
001BA234 KN
001BA233 KN
001BA231 KN
001BA235 KN
001BA241 KN
left:
Base of filler cap is twisted –
interior marking (1) is aligned
with the exterior marking
right:
Base of filler cap is in the cor
-
rect position – interior
marking is below the bracket.
It does not align with the
exterior marking
1
001BA238 KN
001BA239 KN