45
MS 260
English / USA
:
Turn the bar over –
every time you sharpen the chain
and every time you replace the
chain – this helps avoid one-sided
wear, especially at the nose and
underside of the bar.
:
Regularly clean
the oil inlet hole
(1)
,
the oilway
(2)
and
the bar groove
(3)
.
:
Measure groove depth –
with scale on filing gauge* – in area
used most for cutting.
*
see “Guide to Using this Manual”
If groove depth is less than specified:
:
Replace the guide bar.
The drive link tangs will otherwise
scrape along the bottom of the groove
–
the cutters and tie straps will not ride on
the bar rails.
The air filter system can be adapted to
suit different operating conditions by
simply installing a choice of filters.
Fabric filter*
For normal operating conditions and
winter operation.
Fleece filter (non-woven)*
For dry and very dusty work areas.
*
see “Guide to Using this Manual“
Taking Care of Guide Bar
2
001BA119 KN
1
3
3
Chain
type
Pitch
Minimum
groove
depth
Picco
3/8“ P
0.20"
(5.0 mm)
Rapid
1/4“
0.16"
(4.0 mm)
Rapid
3/8“; 0.325“ 0.24"
(6.0 mm)
Rapid
0.404“
0.28"
(7.0 mm)
Air Filter System
Summary of Contents for MS 260
Page 69: ...68 English USA MS 260 ...
Page 137: ...136 español EE UU MS 260 ...