37
MS 192 T
:
Place the engine pan on the
sealing surface of the cylinder,
ensuring that the lug (arrow)
faces the cylindrical crankshaft
stub (1).
217RA148 TG
1
So that the sealing compound is
distributed uniformly, fit the screws
and gently press the engine pan
down.
:
Tighten the screws (arrows)
down crosswise.
217RA1
1
1 TG
– Tightening torques,
Avoid damage to the crankshaft
stub.
– Clean the crankshaft stub with
standard solvent-based
degreasant not containing any
chlorinated or halogenated
hydrocarbons.
– Install the engine,
– Reassemble remaining parts in
reverse order.
– Remove the engine,
– Remove the crankshaft,
:
Remove the ball bearing (1) and
washer.
1
217RA1
18 TG
:
Remove the ball bearing (1) and
washer.
376RA121 TG
1
:
The crankshaft (1), connecting
rod (2), the needle bearing
between them and the needle
bearing (3) form an inseparable
unit. They must always be
replaced as a complete unit.
The deep groove ball bearings and
376RA128 TG
1
3
2
oil seals must always be replaced
when installing a new crankshaft.
– Before installing the crankshaft,
clean it with standard solvent-
based degreasant not containing
any chlorinated or halogenated
hydrocarbons.
:
Fit the washer (1).
376RA133 TG
1
8.5.3
Crankshaft / Bearing
