MS 150 C
English
28
N
Push the hand guard (1) forward –
the chain is locked.
N
Press down the trigger lockout (2)
and pull the throttle trigger (3) at the
same time. Set Master Control
lever (4) to starting throttle
position (
n
).
N
Set choke lever to required position.
Choke shutter closed (
l
)
–
if the engine is cold (also use this
position if the engine stopped when
you opened the throttle after
starting)
Choke shutter open (
j
)
–
if the engine is warm, i.e. if it has
been running for about one minute.
N
Hold and start your saw as
described.
When engine begins to fire
N
Move the choke lever to the open
position (
j
).
N
Hold and start your saw as
described.
As soon as the engine runs
N
Press down trigger lockout and the
blip the throttle trigger (2) – the
Master Control lever (1) moves to
the run position (
F
) and the engine
settles down to idling speed.
N
Pull the hand guard toward the
handlebar to disengage the chain
brake.
NOTICE
Always disengage chain brake before
accelerating the engine. High revs with
the chain brake engaged (chain locked)
will quickly damage the clutch and chain
brake.
N
After a cold start, warm up the
engine at varying speeds – your saw
is ready for operation.
1
2
3
4
201
1BA064 KN
201
1BA019 KN
201
1BA020 KN
201
1BA020 KN
1
201
1BA022 KN
2
201
1BA001 KN