MS 150 C
English
31
If the groove is not at least this deep:
N
Replace guide bar
Otherwise the drive links will grind
against the base of the groove – the
bottoms of the cutters and the tie straps
will not lie against the bar.
If there is a noticeable loss of engine
power
N
Turn the twist lock 90°
counterclockwise.
N
Remove the shroud upwards.
N
Remove the air filter upwards.
N
Wash the filter in STIHL special
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water) and then dry.
NOTICE
Do not use a brush to clean the filter.
Always replace a damaged filter.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
Picco
3/8“ P
5.0 mm
Rapid
3/8“; 0.325“ 6.0 mm
Rapid
0.404“
7.0 mm
Cleaning the Air Filter
201
1BA024 KN
201
1BA025 KN
Engine Management
