MS 150 C
English
19
Disengaging the Chain Brake
N
Pull the hand guard towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Removing the chain sprocket cover
N
Unscrew the nut (1) and remove the
sprocket cover (2).
Mounting the guide bar
N
Turn the screw (1)
counterclockwise until the tensioner
slide (2) butts against the left end of
the housing slot.
N
Fit the guide bar over the stud (3)
and engage the peg of the tensioner
slide in the hole (4).
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
N
Fit chain around the sprocket (1)
and over the guide bar – the cutting
edges on top of the bar must point to
the bar nose.
N
Turn the tensioning screw (2)
clockwise until there is very little
chain sag on the underside of the
bar – and the drive link tangs are
engaged in the bar groove.
Mounting the Bar and Chain
201
1BA001 KN
1
201
1BA050 KN
2
201
1BA051 KN
1
2
4
3
201
1BA052 KN
201
1BA053 KN
1
2
201
1BA054 KN
