![background image](http://html1.mh-extra.com/html/stihl/fs-km/fs-km_instruction-manual_1378667024.webp)
FS-KM
English
22
Balancing the Machine
The unit is balanced differently
depending on the cutting attachment
used.
Proceed as follows until the conditions
specified under "Floating positions"
have been met:
N
Loosen the screw (3).
N
Adjust the carrying ring.
N
Tighten the screw moderately.
N
Allow the unit to hang freely.
N
Check the position obtained.
Floating positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
N
should just touch the ground.
Circular saw blades (B)
N
should "hover" about 20 cm (8 in)
above the ground.
When the correct floating position has
been reached:
N
Tighten down the screw on the
carrying ring firmly.
Starting the Engine
Always follow the operating instructions
for the KombiEngine and basic power
tool.
N
Put the unit on the ground: It must
rest securely on the engine support
and the deflector.
N
If fitted: Remove the transport guard
from the cutting attachment.
To reduce the risk of accidents, check
that the cutting attachment is not
touching the ground of any other
obstacles.
Balancing the Machine
002BA309 KN
3
A
002BA034 KN
B
002BA035 KN
Starting / Stopping the
Engine
233BA020 KN
233BA014 KN
Summary of Contents for FS-KM
Page 2: ...Instruction Manual 1 32 Manual de instrucciones 33 66 ...
Page 69: ...FS KM español EE UU 67 ...
Page 70: ...FS KM español EE UU 68 ...
Page 71: ......