FS 160, FS 220, FS 280, FS 290
English
70
FS 220, FS 280, FS 290 – Mounting
handle support and bike handle
Mounting the handle support
N
Remove the seven mounting
screws from the support (1) and
take away the front part of the
support.
N
Check that the nut (2) is in position
in the handle support.
N
Fit the drive tube in the rear half of
the handle support – mounting area
for perforated strip must face
engine.
N
Fit the perforated strip (3) and line
up the holes.
N
Fit the front half of the support.
N
Fit the seven mounting screws but
do not tighten them down yet.
N
Position the support so that the
distance (A) between it and the
clutch housing (4) is about 24 cm.
N
Now tighten down the seven
mounting screws on the support
firmly.
1
324BA088 KN
2
324BA082 KN
3
1
4
324BA083 KN
A
