![background image](http://html1.mh-extra.com/html/stihl/fs-160/fs-160_instruction-manual_1378613079.webp)
FS 160, FS 220, FS 280, FS 290
English
77
N
Place the cutting attachment (1) in
position.
WARNING
Collar (a) must locate in the cutting
attachment's mounting hole (b).
Securing the cutting attachment
N
Fit the thrust washer (2) – convex
side must face up.
N
Fit the rider plate (3) (for mowing
applications).
N
Block the shaft.
N
Screw the mounting nut (4) on to the
shaft counterclockwise and tighten
it down firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
Removing the cutting attachment
N
Block the shaft.
N
Unscrew the mounting nut
clockwise.
N
Pull the cutting attachment with its
mounting hardware off the gearbox.
Shredder Blade 270-2
Mounting the cutting attachment
N
Fit the guard ring for mowing
applications.
N
Place the shredder blade (1) in
position – the cutting edges must
point upwards.
WARNING
Collar (a) must locate in the cutting
attachment's mounting hole (b).
Securing the cutting attachment
N
Fit the thrust washer (2) – convex
side must face up.
N
Fit the guard ring (3).
N
Block the shaft.
N
Screw the mounting nut (4) on to the
shaft counterclockwise and tighten
it down firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
Removing the cutting attachment
N
Block the shaft.
N
Unscrew the mounting nut
clockwise.
N
Pull the cutting attachment with its
mounting hardware off the gearbox.
002BA521 KN
b
2
3
1
4
a
a
1
002BA522 KN
3
4
2
b
3
b