![background image](http://html1.mh-extra.com/html/stihl/fs-160/fs-160_instruction-manual_1378613070.webp)
FS 160, FS 220, FS 280, FS 290
English
68
Fitting the throttle cable
NOTICE
Do not kink the throttle cable or lay it in
tight radii – make sure the throttle trigger
moves freely.
N
Push the throttle cable (12) into the
retainer (13).
Adjusting the throttle cable
On control handles with slide:
N
Check adjustment of throttle cable –
see chapter on "Adjusting the
Throttle Cable".
FS 220, FS 280, FS 290 – Mounting
bike handle with preassembled handle
support
Adjusting and securing the handlebar
N
Perforated strip on handle
support (3) faces operator.
N
Loosen the hex head screw (1).
N
Rotate the bike handle on the
support (3) a quarter turn
counterclockwise.
N
Swing the ends of the handlebar up.
N
Tighten down the hex head
screw (1) firmly.
N
Push the handlebar to the left until
distance (A) is about 15 cm.
N
Tighten down the screws (2) firmly.
N
Remove the seven mounting
screws from the support (3) and
take away the front part of the
support.
N
Position the drive tube in the rear
part of the support.
N
Refit the front part of the support.
N
Fit the seven mounting screws but
do not tighten them down yet.
12
13
12
13
13
393BA049 KN
324BA060 KN
A
1
2
3
3
324BA052 KN