background image

4

English / USA

FC 110

!

Warning!

Prolonged use of an edger (or other 
machines) exposing the operator to 
vibrations may produce whitefinger 
disease (Raynaud's phenomenon) or 
carpal tunnel syndrome. These con-
ditions reduce the hand's ability to feel 
and regulate temperature, produce 
numbness and burning sensations and 
may cause nerve and circulation 
damage and tissue necrosis.

All factors which contribute to white-
finger disease are not known, but cold 
weather, smoking and diseases or 
physical conditions that affect blood 
vessels and blood transport, as well as 
high vibration levels and long periods of 
exposure to vibration are mentioned as 
factors in the development of whitefinger 
disease. In order to reduce the risk of 
whitefinger disease and carpal tunnel 
syndrome, please note the following:

:

Most STIHL power tools are 
available with an anti-vibration 
("AV") system designed to reduce 
the transmission of vibrations 
created by the engine to the 
operator's hands. An AV system is 
recommended for those persons 
using power tools on a regular or 
sustained basis.

:

Wear gloves and keep your hands 
warm.

:

Keep the AV system well 
maintained. An edger with loose 
components or with damaged or 
worn AV buffers will tend to have 
higher vibration levels.

:

Maintain a firm grip at all times, but 
do not squeeze the handles with 
constant, excessive pressures, take 
frequent breaks. 

All the above mentioned precautions do 
not guarantee that you will not sustain 
whitefinger disease or carpal tunnel 
syndrome. Therefore continual and 
regular users should monitor closely the 
condition of their hands and fingers. If 
any of the above symptoms appear, 
seek medical advice immediately.

!

Warning!

The ignition system of your unit 
produces an electromagnetic field of a 
very low intensity. This field may 
interfere with some pacemakers. To 
reduce the risk of serious or fatal injury, 
persons with pacemaker should consult 
their physician and the pacemaker 
manufacturer before operating this tool.

Proper Clothing

!

Warning!

Edger operation can 
cause serious injury to 
eyes, ears and person. 
The deflector and skirt 
provided with your edger 
may not protect the 

operator from all foreign objects (gravel, 
glass, wire, etc.) thrown by the rotating 
cutting attachment. Thrown objects may 
also ricochet and strike the operator. To 
reduce the risk of injury to your eyes 
never operate an edger unless wearing 
goggles or properly fitted safety glasses 
with adequate top and side protection 
complying with ANSI Z 87.1 (or your 
applicable national standard).

To reduce the risk of injury to your face 
STIHL recommends that you also wear 
a face shield or face screen over your 
goggles or safety glasses.

Summary of Contents for FC 110





















Reviews: