14
English / USA
FC 110
:
Retighten wing nut clockwise.
:
Standing in the normal working
position, check the depth of cut
again and correct it if necessary.
Edging
:
Start the engine.
:
Start the cut at half throttle and
continue cutting at full throttle.
:
Hold and guide the unit so that it is
vertical.
:
Cut at a rate which suits the cutting
performance of the blade – do not
apply force!
:
Set the cutting rate for a normal
walking pace.
:
Do not push the blade into the
ground.
:
Always push the edger forwards –
never pull it.
:
Cut at a steady pace to avoid having
to make several passes.
:
Gunning sight for cutting blade (
1
)
245BA007 KN
245BA008 KN
90°
245BA009 KN
1