13
BR 500, BR 550, BR 600
– Remove the starter cover with
rewind starter,
b
5.2
– Remove the rope rotor,
b
5.4
– Remove the remaining rope from
the rope rotor and starter grip.
:
Tie one of the special knots
shown in the end of the new
starter rope.
VA
982RA036
:
Thread the new rope through the
top of the starter grip from above.
– Pull the rope with knot into the
starter grip.
212RA307
VA
– Inspect rope guide bushing in the
starter cover for damage and
replace if necessary,
b
5.6
:
Thread the starter rope through
the bushing in the starter cover
from outside.
452RA006
VA
:
Thread the rope through the rope
rotor.
– Tie a simple overhand knot in the
end of the rope.
452RA005
VA
:
Pull the rope back into the rotor
so that the knot locates in the
recess (arrow).
– Tension the rewind spring,
b
5.8
Install all other parts in the reverse
sequence.
452RA007
VA
5.5
Starter Rope/Grip
RA_452_00_01_02.book Seite 13 Donnerstag, 16. Februar 2012 11:52 11