4
Approved KombiEngines
4.1
KombiEngines
Only use KombiEngines supplied or explicitly
approved by STIHL for use with the attachment.
This KombiTool may be operated only in combi‐
nation with the following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R, KM 90,
KM 90 R, KM 94 R, KM 100, KM 100 R, KM 110,
KM 110 R, KM 130, KM 130 R, KMA 130 R,
KMA 135 R
WARNING
Loop-handled machines must be equipped with
a barrier bar.
4.2
Brushcutters with split boom
The KombiTool can also be fitted to STIHL
brushcutters with a split boom (T-models) (basic
power tools).
This KombiTool can therefore also be used on
the following machine:
STIHL FR 130 T
WARNING
Refer to the user manual of the power tool for
use of the barrier bar.
5
Assembling the Unit
► Push the nozzle onto the blower tube as far as
the lug and then rotate it clockwise up to stop
to lock in positon.
WARNING
To reduce the risk of injury, operate the unit only
with a properly mounted blower tube.
6
Mounting the KombiTool
6.1
Mounting the KombiTool
2
1
002BA329 KN
4
► Push the lug (1) on the drive tube into the
slot (2) in the coupling sleeve as far as stop.
3
A
548BA008 KN
When correctly mounted, the intake screen (3)
must be flush with the coupling sleeve (gap 'A'
no more than 5 mm).
► Tighten down the wing screw (4) firmly.
6.2
Removing the KombiTool
► Reverse the above sequence to remove the
KombiTool.
7
Starting / Stopping the
Engine
7.1
Starting the Engine
Always follow the operating instructions for the
KombiEngine and basic power tool.
4 Approved KombiEngines
English
0458-548-0121-C
5
