background image

406BA007 KN

548BA004 KN

NOTICE

Start your machine on a clean surface only to

ensure that no dust is sucked in.
► Place the machine securely on the ground and

make sure that bystanders are well clear of

the nozzle outlet.

► Make sure you have a firm footing, either

standing, stooping or kneeling.

► Hold the machine with you left hand and press

it down firmly – do not touch the controls on

the control handle – see KombiEngine or basic

power tool instruction manual.

NOTICE

Do not stand or kneel on the drive tube.

The starting procedure is now as described in

the instruction manual of the KombiEngine or

basic power tool you are using.

7.2

Stopping the Engine

► See KombiEngine or basic power tool instruc‐

tion manual.

8

Storing the Machine

For periods of about 3 months or longer

► Clean and inspect the housing.

► If the KombiTool is removed from the Kom‐

biEngine and stored separately: Fit the protec‐

tive cap on the drive tube to avoid dirt getting

into the coupling.

► Store the machine in a dry, high or locked

location – out of the reach of children and

other unauthorized persons.

9

Maintenance and Care

The following intervals apply to normal operating

conditions only. If your daily working time is lon‐

ger or operating conditions are difficult (very

dusty work area, etc.), shorten the specified

intervals accordingly.
Intake screen

548BA009 KN

► Check and clean before starting work, after

finishing work and when required.

► If damaged, have replaced by dealer

1)

10 Minimize Wear and Avoid

Damage

Observing the instructions in this manual and the

KombiEngine manual helps reduce the risk of

unnecessary wear and damage to the power

tool.
The power tool must be operated, maintained

and stored with the due care and attention

described in these instruction manuals.
The user is responsible for all damage caused by

non-observance of the safety precautions, oper‐

ating and maintenance instructions. This

includes in particular:

Alterations or modifications to the product not

approved by STIHL.

Using tools or accessories which are neither

approved or suitable for the product or are of a

poor quality.

Using the product for purposes for which it

was not designed.

Using the product for sports or competitive

events.

1)

STIHL recommends a STIHL servicing dealer.

English

8 Storing the Machine

6

0458-548-0121-C

Summary of Contents for BG-KM













Reviews: