4
Mounting the Drive Tube
1
238BA016 KN
3
A
2
A
► Pull the protective cap off the drive tube.
► Push the drive tube (1) into the motor hous‐
ing (2) as far as the mark (A), turning the drive
tube back and forth at the same time.
► Tighten down the screw (3) in the housing
firmly.
5
Mounting the Loop Handle
7
8
2
277BA025 KN
1
6
7
8
9
9
3
► Place the clamp (1) in the loop handle (2) and
place it between the lifting eye (3) and the
handle hose (4) on the shaft (5)
► Position the clamp (6) against the shaft
► Line up the holes
► Insert the screws (7) with washers (8)
► Fit the square nuts (9) and screws
277BA026 KN
A
2
► Align the loop handle (2) and move it to the
most comfortable position
Distance (A) must not be more than 45 cm. Rec‐
ommendation: about 35 cm
► Tighten screws
English
4 Mounting the Drive Tube
26
0458-277-9621-B
