Stiga MPST 84 Li 48 V1, Operator'S Manual

Page: 127 / 224

EN - 21
Status Action Result
Operator seated.
Drive pedal in neutral position
(pedal released).
Emergency button deactivated.
Fully insert the key The machine is ready
to be turned ON.
Machine on or in operation. The operator stands up from the seat. All services are deactivated. The
icon in fig. 13.E icon flashes and
the icon in fig. 13.P is illuminated.
Operator seated.
Drive pedal in forward or
reverse position.
Try to start the machine. The icons in fig. 13.E and
fig. 13.O remain ON, battery
LEDs 1, 2, 4 and 5 flash.
Pushbutton panel of type “I” e “II”
Pushbutton panel of type “III”
Emergency button activated. Attempt to start the machine. The machine switches ON. The
icon in fig. 7.E flashes and the
icon in fig. 7.O is illuminated. Drive
and cutting means do not work.
Cutting means engaged. Reverse is activated without
holding down the reverse
mowing consent button.
The cutting means disengage.
Cutting means engaged. Lift the grass catcher or remove
the rear discharge guard (for
rear collection models only)
The cutting means disengage.
SAFETY INSTRUCTION
Always perform safety checks before use.
7.2.1 General safety check
Object Result
Battery No damage to
casing and cover.
Rear discharge
protection, grass catcher
(only for models with
rear grass catcher)
Good condition. No
damage. Properly
installed.
Side discharge protection
(for models with side
discharge only)
Good condition. No
damage. Properly
installed .
Electrical cables All insulation intact.
No mechanical damage.
Object Result
Operate the machine
forwards/reverse and
release the drive pedal.
The machine slows
down and stops.
Safety devices Proceed as indicated
in par. 7.2.2
7.2.2 Control of safety devices
The safety devices work in two ways:
A. they prevent the electric engine
from starting if all the safety
requirements have not been met;
B. by stopping the electric engine if even just
one of the safety requirements is lacking.