Stiga E 300 Li 20 A, Operator'S Manual, Page: 36 / 42

EN - 9
4. The cut grass is no
longer collected in
the grass catcher
The blade hit a foreign object
Turn off the motor and remove the safety key.
Check if there is any damage and contact
a Authorised Service Dealer to replace
the blade if necessary. (par. 7.3)
The inner part of the chassis is soiled
Clean the inner part of the chassis to
facilitate the evacuation of the grass
toward the grass catcher (par. 7.2.2)
5. Mowing is difficult. The blade is not in good condition Contact an authorised service dealer for the
sharpening or replacement of the blade.
6. Excessive noise and/or
vibration is
experienced
whilst working.
Blade fittings are loose or
the blade is damaged.
Immediately turn off the motor
and remove the safety key.
Contact an authorised service dealer for
checks, replacements or repairs (par. 7.3).
7. Battery power
reserve is low.
Severe working conditions requiring
greater current absorption.
Optimise operations (par. 7.1.1).
Battery is insufficient for
operating requirements.
Use a second battery or extended
battery (par. 13.1).
8. The battery charger is not
recharging the battery.
Battery is not correctly inserted
in the battery charger.
Check it is correctly inserted (par. 7.1.2).
Unsuitable environmental conditions. Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual).
Dirty contacts. Clean the contacts.
The battery charger is not energised. Check it is plugged in and the
power socket is energised.
Faulty battery charger. Replace with an original spare part.
If the problem persists, refer to the
battery/battery charger manual.
13. ATTACHMENTS ON REQUEST
13.1 BATTERIES
Different capacity batteries are available to
suit specific operating requirements (Fig.35).
The list of approved batteries for this machine
is found in the “Technical Data” table.
13.2 BATTERY CHARGER
Device used to recharge the battery (Fig. 36).