Stiga E 300 Li 20 A, Operator'S Manual, Page: 34 / 42

EN - 7
special tools; for safety reasons, these jobs are best
carried out at an authorised service dealer.
Make sure damaged, misshapen or worn blades
are replaced, together with the screws in place to pre-
serve balance.
IMPORTANT Always use original blade bearing
the code indicated in the “Technical Data”.
Given product evolution, the blade listed in the “Technical
Data” table may be replaced in time with others having
similar interchangeable and operating safety features.
8. STORAGE
8.1 STORING THE MACHINE
Store the machine only in a horizontal
position and safely positioned on the ground.
Do not store the machine upright.
When the machine is to be stored away:
1. Wait for the engine to cool
2. Remove the safety key.
3. Remove the battery from its slot
and recharge it (par 7.2.2).
4. Clean (par. 7.3).
5. Store the machine:
– in a dry place
– protected from inclement weather
– covered with a sheet if possible
– in a place out of children’s reach
– making sure that keys or tools used
for maintenance are removed.
8.2 STORING THE BATTERY
If the battery is not charged for a long period of time, it
must be kept in a cool, shaded place without humidity,
with environmental temperature between 0~45°C.
NOTE If unused for any length of time, recharge the
battery every two months to prolong its working life.
9. HANDLING AND TRANSPORT
Whenever the machine is to be handled,
lifted, transported or tilted you must:
– Stop the machine (par. 6.5)
– Remove the safety key
– Make sure that all moving parts have
come to a complete stop
– Wear protective work gloves
– Hold the machine in the points offering a safe grip,
taking into account the weight and its layout.
– Use an appropriate number of people for the
weight of the machine and the characteristics
of the transport vehicle or the place where
it must be placed or collected.
– Make sure that machine handling does
not cause damage or injuries.
When transporting the machine on
a vehicle or trailer, always:
1. Use an access ramp of suitable
strength, width and length
2. Lower the cutting blade assembly.
3. Position it so that it does not cause
a hazard to anyone.
4. Fasten it firmly to the means of transport using
ropes or chains to prevent it from tipping over.
10. ASSISTANCE AND REPAIRS
This manual provides all the necessary information to run
the machine and for correct basic maintenance operations
which can be performed by the user. Any regulations and
maintenance operations not described herein must be
carried out by your Dealer or Authorised Service Dealer.
Any operations performed by unauthorised dealers or by
unqualified persons will totally invalidate the Warranty and
all obligations and responsibilities of the Manufacturer.
Non-original parts and attachments are not approved;
use of non-original spare parts and attachments will
jeopardise the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
Original spare parts are supplied by authorised
Dealers and by Authorised Service Dealers.
11. WARRANTY
The warranty conditions are intended for consumers
only, i.e. non-professional operators.
The warranty covers all material quality and
manufacturing defects recognised during the warranty
period by your Dealer or Authorised Service Dealer.
The warranty is restricted to the repair or replacement
of components recognised as faulty.
It is advisable to send your machine once a year
to an Authorised Service Dealer for servicing,
assistance and safety inspection.
The warranty only applies to machines
subjected to regular maintenance.
The user must follow all the instructions provided
in the accompanying documentation.
The warranty does not cover damages resulting from:
• Failure to become familiar with the documentation
accompanying the machine (Owner’s manual).
• Professional use.
• Carelessness, negligence.
• External causes (lightning, impact, presence of
foreign bodies inside the machine) or incidents.
• Incorrect use or assembly or prohibited
by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare parts (adaptable parts).
• Use of attachments not supplied or not
approved by the manufacturer.
The warranty does not cover:
• The routine/occasional maintenance operations
(described in the instruction manual).
• Normal wear and tear of consumables such as
blades, wheels, safety bolts and wiring.
• Normal wear and tear.
• Deterioration in the appearance of
the machine due to use.
• Cutting blades supports.
• Any ancillary expenses related to the enforcement
of the warranty, such as costs incurred to travel to