WORKSHOP MANUAL
PARK
Chapter
2 - INFORMATION FOR SERVICE CENTRES
EDITION
2020
PAGE
22 /
124
c) Checking operation of electrical safety devices
If one of the above conditions does not occur, check the operation of the safety micros-
witches, simulating the different situations of use as indicated in the specific chapter
[
.
2.5.7 General checks
a) Tyres, inflation pressure
Check the pressure and adjust if necessary. The recommended air pressure is indicated on the
footboard mat.
b) Engine oil and oil filter
See the “Instructions for use” supplied with the machine and the engine manufacturer's manual.
c) Hydrostatic transmission unit oil
See the “Instructions for use” supplied with the machine and the engine manufacturer's manual.
For the description of the interventions, see the chapters “Wheels-Transmission-Brake”
[
and “Hydraulic system”
[
of this manual.
d) Belt transmissions
Check the condition of all the belts and the efficiency of the tensioners.
e) Steering, control and adjustment
See chapter “Steering”
[
of this manual.
f) Engine air filter
See the “Instructions for use” supplied with the machine and the engine manufacturer's manual.
g) Cooling tabs
Remove the protective covers from the engine and clean between the cooling tabs. Use a
brush and compressed air. Check the engine Manufacturer’s Manual.
h) Spark plugs
Remove the spark plug (or spark plugs) and clean them or replace them if necessary. Check the
engine Manufacturer’s Manual.
I) Valve backlash
Check the engine Manufacturer’s Manual.
j) General lubrication
Lubricate the articulation point (4 lubricators) and all the parts indicated in the appropriate section
of this manual.
[
k) Transmission
Check that there are no abnormal noises.
