Stiga 2021 Edition PARK 320 P, Workshop Manual

Page: 64 / 124

WORKSHOP MANUAL
PARK
Chapter
6 - TRANSMISSION BELTS
EDITION
2020
PAGE
64 /
124
6.3.3 Replacement of the articulated joint / PTO belt (Ref. C)
▶▶ Park 4WD machines:
1. Remove the front casing [ 3.1.2] and the
right and left rear casings [ 3.1.3] paying
attention to the fact that their removal caus-
es the loss of the fastening points of the belt
guide arch.
2. Release the spring (1) to loosen the tight-
ener (2).
3. Unscrew the nut (3) and remove the tight-
ener (2) to release the belt (4) from the re-
taining pin (5).
4. Remove the belt (4).
When assembling, perform the steps described above in re-
verse order, taking care to reassemble the tightener (2) with
the protruding part of the hub facing upwards.
6.3.4 Removal of the PTO engagement tightener lever
▶▶ Park 4WD machines:
1. Release the spring (1).
1
2
2
4
2 3
5
1